{"product_id":"skywatch-xplorer-windmeter","title":"Skywatch Xplorer Windmeter","description":"\u003cp\u003eSkywatch Xplorer is a line of waterproof windmeters manufactured in Switzerland by JDC Electronic SA. It is a hand held device that measures windspeed, temperature, windchill, altitude, air pressure, and compass direction. It will read the wind and the air changes, and it also allows you to predict the weather.\u003c\/p\u003e\u003cp\u003eEach windmeter tells the time and the date. It also has a backlight so you can see at night.\u003c\/p\u003e\u003cp\u003eThe Skywatch Xplorer 1, 2, 3 and 4 windmeters are a line of hand held digital instruments specifically developed for outdoor sports. They have an impact resistant, rustproof plastic body, and their shape fits naturally in your hand.\u003c\/p\u003e\u003cp\u003eRead the wind with the Skywatch Xplorer 1, 2, 3 and 4 wind meters, used for kiteboarding, kitesurfing, sailing, windsurfing, snowkiting, hang gliding, paragliding, boating, shooting, golf, model flying, running, fishing, hiking, RC aircraft and many more outdoor activities.\u003c\/p\u003e\u003cp\u003eThey are also great for testing wind before you go out. Test the wind before you jump, measuring the speed, direction and temperature.\u003c\/p\u003e\u003ch3\u003eChoose your model\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkywatch Xplorer 1:\u003c\/strong\u003e Anemometer with max speed reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkywatch Xplorer 2:\u003c\/strong\u003e Anemometer-thermometer with max speed reach and windchill factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkywatch Xplorer 3:\u003c\/strong\u003e Anemometer-thermometer-electronic compass with max speed tech and windchill factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkywatch Xplorer 4:\u003c\/strong\u003e Anemo-thermo-barometer-electronic compass with max speed tech and windchill factor, altitude and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimension: 3.5 x 1.5 x 0.75 in, 2 oz. (41 x 93 x 17 mm, 50 g)\u003c\/li\u003e\n\u003cli\u003eOne button operation\u003c\/li\u003e\n\u003cli\u003eEL Backlight\u003c\/li\u003e\n\u003cli\u003eCompletely sealed; internal sensors\u003c\/li\u003e\n\u003cli\u003eWeatherproof (can be submerged 6 feet)\u003c\/li\u003e\n\u003cli\u003eReplaceable Lithium battery (included and installed)\u003c\/li\u003e\n\u003cli\u003eStainless steel back\u003c\/li\u003e\n\u003cli\u003eAuto-off after one minute (can be disabled to remain on)\u003c\/li\u003e\n\u003cli\u003eIncluded lanyard\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eDesigned in Switzerland\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWindspeed\u003c\/h3\u003e\u003cp\u003eAll Xplorers. The balanced impeller is integrated into the wind meter. The impeller is magnetized, producing a magnetic field when rotating which is measured internally. Damage to the impeller is unlikely due to the small opening, but repair can be performed.\u003c\/p\u003e\u003ch3\u003eTemperature\u003c\/h3\u003e\u003cp\u003eXplorers 1, 2, 3 and 4. The internal thermometer is attached to the stainless steel back. This allows for fast temperature checks, providing quick and accurate readings. Temperature is read quickly by touching the back to an object of the same temperature. Water temperature is read quickly by submerging the unit briefly.\u003c\/p\u003e\u003ch3\u003eDigital compass: Xplorer 3 and 4\u003c\/h3\u003e\u003cp\u003eDesigned to be used in vertical position. Will display windspeed and compass simultaneously. Electronic calibration before use ensures absolute precision (easy process). Calibration is essential for proper use. Accurate wind direction can be found in this way.\u003c\/p\u003e\u003ch3\u003eAltitude: Xplorer 4\u003c\/h3\u003e\u003cp\u003eDrastic air pressure variance (weather front) will impact altitude readings (usually occurs over 12+ hours). Several seconds is needed to adjust to new altitude. The highest accuracy is achieved when the altitude is properly set, a change in altitude is more than 10 feet, and several seconds are allowed for adjustment. For example, the Xplorer 4 may be moved from one level of a house to another, and a change of 10 feet will be recorded (standard ceiling height). Altitude and air pressure are measured on the same sensor, and adjusting one will adjust the other. Altitude history is recorded every hour for the past 48 hours. Altitude in feet can only be displayed up to 9,999 ft., after which the unit will revert to meters. This is due to the number of digits available for altitude readings (four digits). See instruction manual for more details.\u003c\/p\u003e\u003ch3\u003eAir pressure: Xplorer 4\u003c\/h3\u003e\u003cp\u003eAir pressure is read in either relative or absolute air pressure. Relative air pressure factors out the change in elevation. Once the relative air pressure is set, if no changes to altitude occur the accuracy is within 0.01 inHg. The most important factor in changing weather is the change in air pressure. Rising air pressure indicates better weather, falling air pressure indicates worsening weather. With the air pressure history, one can accurately predict future weather. Air pressure history is recorded every hour for the past 48 hours, although the past 6-12 hours is most important. See instruction manual for more detail.\u003c\/p\u003e\u003ch3\u003eWhat each model shows\u003c\/h3\u003e\u003cp\u003ePress the button to step through the modes. The Xplorer 1 has 1 mode. The Xplorer 2 has 3 modes. The Xplorer 3 has 4 modes. The Xplorer 4 has 9 modes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXplorer 1:\u003c\/strong\u003e Wind and maximum wind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXplorer 2:\u003c\/strong\u003e Wind and maximum wind; wind and temperature; wind and windchill temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXplorer 3:\u003c\/strong\u003e Wind and maximum wind; wind and temperature; wind and windchill temperature; wind and compass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXplorer 4:\u003c\/strong\u003e Wind and maximum wind; wind and temperature; wind and windchill temperature; wind and compass; wind, altitude and maximum altitude; wind, relative and absolute pressure; record of pressure trends; record of relative pressure; record of altitude.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWind speed, in detail\u003c\/h3\u003e\u003cp\u003eWind speed can be read in km\/h, mph, knots, m\/s or feet per second. The range is 0 to 150 km\/h (42 m\/s, 81 knots, 93 mph, 136 feet per second). Precision is plus or minus 3 percent. The meter takes 2 measurements per second. The current speed shows on the large digits and the maximum speed reached shows on the small digits with max. The maximum is kept even when the meter is off. To reset the maximum to zero, keep the button pressed for at least 2 seconds.\u003c\/p\u003e\u003ch3\u003eTemperature, in detail\u003c\/h3\u003e\u003cp\u003eXplorer 2, 3 and 4. Temperature can be read in Celsius or Fahrenheit. The sensor is in the metal back. The range is minus 50 C to 100 C. The meter takes one temperature measurement every 0.5 seconds.\u003c\/p\u003e\u003ch3\u003eBacklight\u003c\/h3\u003e\u003cp\u003eKeep the button pressed for 1 second to turn on the backlight. It stays lit for 3 seconds. If you turn it on again within 5 seconds, it stays lit for 15 seconds. Heavy use of the backlight uses much more battery power, about 100 times more than without the backlight.\u003c\/p\u003e","brand":"PBKiteboarding.com","offers":[{"title":"Xplorer 1","offer_id":50836748796079,"sku":null,"price":89.95,"currency_code":"CAD","in_stock":true},{"title":"Xplorer 2","offer_id":50836748828847,"sku":null,"price":109.95,"currency_code":"CAD","in_stock":true},{"title":"Xplorer 3","offer_id":50836748861615,"sku":null,"price":159.95,"currency_code":"CAD","in_stock":true},{"title":"Xplorer 4","offer_id":50836748894383,"sku":null,"price":189.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/7792\/0175\/files\/skywatch-xplorer-1-windmeter-teal-blue-digital-display-knots-white-background-toronto.jpg?v=1794169278","url":"https:\/\/pbkiteboarding.com\/products\/skywatch-xplorer-windmeter","provider":"PBKiteboarding.com","version":"1.0","type":"link"}